- For removing salt from your
trailer, you can get the best results by spraying the trailer with Salt-Away immediately
after launching your boat, and again after loading the boat back onto the trailer. The best equipment to use for this job is a compression pump sprayer (weed sprayer). Add 2 fluid ounces of Salt-Away (59 ml) to each US gallon (3.79L) of water in the tank.
Copyright, Salt-Away Products 1994. All rights reserved.
- Just connect Salt-Away’s Mixing Unit in line between
the hose and the connector, and flush until your see the foaming action coming
out on the ground, then turn the Unit off.
will not harm your brake pads, or any part of the braking system.
- Leave Salt-Away inside the braking system to inhibit
rusting and other corrosion.
- Use Salt-Away’s
Kit, the ideal product for flushing the salt through your trailer’s brake
trailer manufacturers build trailers with the capability of flushing the salt
from the brakes, using a hose connector and water line going to the brakes.
- Salt-Away is the perfect
product to remove salt from your boat trailers and towing vehicles.
- Depending on the equipment, some
boaters expose their towing vehicle to salt water while launching their boats,
and forget to remove the salt from the undercarriage of the vehicle.